Traction & Control
-
286 Phantom Series Studs & Suport Plates by Woody´s (5/16 - 1.075” Pack of 96 (for 129” & 137” tracks) - REV Gen4, XS, XP, XR
399,35 €A complete line of traction products developed specifically for Ski-Doo’s REV Gen4, XS, XP, XR tracks Due to the unique track design, this is the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
286 Phantom series Studs & Support Plates by Woody`s (5/16 - 1.325” Pack of 84 (for 120” track) - REV Gen4, XS, XP, XR
367,68 €A complete line of traction products developed specifically for Ski-Doo’s REV Gen4, XS, XP, XR tracks Due to the unique track design, this is the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
286 Phantom Series Studs & Support Plates by Woody´s (5/16 - 1.075” Pack of 500) - REV Gen4, XS, XP, XR
2.137,40 €A complete line of traction products developed specifically for Ski-Doo’s REV Gen4, XS, XP, XR tracks Due to the unique track design, this is the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
286 Phantom Series Studs & Support Plates by Woody´s (5/16 - 1.075” Pack of 84 (for 120” track) - REV Gen4, XS, XP, XR
342,72 €A complete line of traction products developed specifically for Ski-Doo’s REV Gen4, XS, XP, XR tracks Due to the unique track design, this is the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
286 Phantom Series Studs & Support Plates by Woody´s (5/16 - 1.325” Pack of 500) - REV Gen4, XS, XP, XR
2.009,39 €A complete line of traction products developed specifically for Ski-Doo’s REV Gen4, XS, XP, XR tracks Due to the unique track design, this is the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
286 Phantom series Studs & Support Plates by Woody´s (5/16 - 1.325” Pack of 90 (for 129” track) - REV Gen4, XS, XP, XR
499,20 €A complete line of traction products developed specifically for Ski-Doo’s REV Gen4, XS, XP, XR tracks Due to the unique track design, this is the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
286 Phantom Series Studs & Support Plates by Woody´s (5/16 - 1.325” Pack of 96 (for 137” track) - REV Gen4, XS, XP, XR
536,65 €A complete line of traction products developed specifically for Ski-Doo’s REV Gen4, XS, XP, XR tracks Due to the unique track design, this is the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP. Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
-
-
Blade DS Skis
959,54 €Designed for precise steering in soft powder snow Sold in pairs Availability date: 3-9 days -
Blade Ski Liners - Asymmetrical
135,59 €Ski liners for the new Blade skis Full wide symmetrical version (width 290 mm) for extreme deep snow applications and an asymmetrical version (width 240 mm), which is narrow on the outside, to make sidehilling easier Sold in pairs Availability date: 3-9 days -
Blade Ski Liners - Symmetrical
128,94 €Ski liners for the new Blade skis Full wide symmetrical version (width 290 mm) for extreme deep snow applications and an asymmetrical version (width 240 mm), which is narrow on the outside, to make sidehilling easier Sold in pairs Availability date: 3-9 days -
Blade Ski Liners - Symmetrical Heavy-duty
180,52 €Ski liners for the new Blade skis Full wide symmetrical version (width 290 mm) for extreme deep snow applications and an asymmetrical version (width 240 mm), which is narrow on the outside, to make sidehilling easier Sold in pairs Availability date: 3-9 days -
Blade XC Skis
528,49 €New design. It is the perfect combination of flotation in deep snow and sharp steering on hard packed snow. Sold in pairs Availability date: 3-9 days -
Carbide Runner (Preformed 4” 60°) - Pilot skis, except DS & DS-2
83,42 €The Dooly† by Woodys has two 7/16” Flat-top† runners mounted on a plate for each ski Four contact lines on snow surface help decrease darting of sled as it makes own groove in a trail When in a turn, only one of the Dooly bars is in contact with the snow or ice A Dooly with 4”, 6” or 8” of carbide on both runners provides the same turning power as a single runner with 4”, 6” or 8” of turning carbide Sold individually Compatibility: Pilot skis, except DS & DS-2 Availability date: 3-9 days -
Carbide Runner (Preformed 6” 60°) - Pilot skis, except DS & DS-2
101,15 €The Dooly† by Woodys has two 7/16” Flat-top† runners mounted on a plate for each ski Four contact lines on snow surface help decrease darting of sled as it makes own groove in a trail When in a turn, only one of the Dooly bars is in contact with the snow or ice A Dooly with 4”, 6” or 8” of carbide on both runners provides the same turning power as a single runner with 4”, 6” or 8” of turning carbide Sold individually Compatibility: Pilot skis, except DS & DS-2 Availability date: 3-9 days -
Carbide Runner (Preformed 8” 60°) - Pilot skis, except DS & DS-2
146,00 €The Dooly† by Woodys has two 7/16” Flat-top† runners mounted on a plate for each ski Four contact lines on snow surface help decrease darting of sled as it makes own groove in a trail When in a turn, only one of the Dooly bars is in contact with the snow or ice A Dooly with 4”, 6” or 8” of carbide on both runners provides the same turning power as a single runner with 4”, 6” or 8” of turning carbide Sold individually Compatibility: Pilot skis, except DS & DS-2 Availability date: 3-9 days -
-
DS-3 Ski Tip Kit (black) - Fits vehicles with DS-3 skis
124,77 €Easy-install custom color tips changes the appearance of your sled in minutes Adds flotation on the front of the DS-3 ski Sold in pairs with mounting hardware Compatibility: Fits vehicles with DS-3 skis Availability date: 3-9 days -
Executive Carbides - REV Gen4, XP, XR, XS, XM, XU Tundra
167,98 €½” round preformed material swedged at each end to best fit ski contour fitted with 8” of 60° turning carbide Performance trail riders are known to use this runner Provides proper balance with a studded track Pack of 2 Compatibility: REV Gen4, XP, XR, XS, XM, XU Tundra Availability date: 3-9 days -
Extender Train III Carbides - REV Gen4, XP, XR, XS, XM, XU Tundra
118,06 €½” round preformed material swedged at each end to best fit ski contour 4” of 60° turning carbide provides positive cornering control Pack of 2 Compatibility: REV Gen4, XP, XR, XS, XM, XU Tundra Availability date: 3-9 days -
Phantom Sharp Studs & Support Plates by Woody´s ( 5/16 - 1.325” Pack of 84 (for 120” track) - REV Gen4, XS, XP, XR
367,68 €All the benefits of 286 Phantom Series studs Unique track design makes it the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
Phantom Sharp Studs & Support Plates by Woody´s (5/16 - 1.325” Pack of 500) - REV Gen4, XS, XP, XR
2.009,39 €All the benefits of 286 Phantom Series studs Unique track design makes it the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
Phantom Sharp Studs & Support Plates by Woody´s (5/16 - 1.325” Pack of 96 (for 129” & 137” tracks) - REV Gen4, XS, XP, XR
536,65 €All the benefits of 286 Phantom Series studs Unique track design makes it the only traction product available to maintain track warranty and track life Kit complete with stud, nut and support plate The only traction product approved by BRP Compatibility: REV Gen4, XS, XP, XR Availability date: 3-9 days -
Pilot 5.7 Ski Upgrade Kit
436,81 €Complete kit for upgrading earlier snowmobile models Includes 2 skis, 2 handles with rivet kit, 2 Expedition carbides and all required hardware Availability date: 3-9 days
© 2023 Ski & Sea d.o.o. | Pravila poslovanja