ACCESSORIES

Compatibility Required to fit stackable fuel caddy on REV-XS, XM, XP. REV-XS, XM, XP, XU Tundra Does not fit 120” models Availability date: 3-9 days

The best choice for any BRP vehicle with a 4-stroke engine used in winter cold condition Full-synthetic formula made from premium oil base stocks Performs consistently throughout a broad temperature range Tested and proven by BRP engineers to offer the best engine protection where its use is specified Cold weather pour point/flow temperature = -45°C/-49°F Easy cold starting Protects against corrosion and rust Availability date: 3-9 days

3” (7.6 cm) round reflector with adjustable angle Compatibility: REV-XU, XR (with extra high one-piece windshield) Availability date: 3-9 days

Assortment of replacement or additional vents (7x) with hardware Can be installed on most body panels with relatively flat surface and 2.5 to 3.2 mm thickness Compatibility: All models Availability date: 3-9 days

Cast stainless steel construction Mounting pattern for Heavy-duty bumpers and Multi-Mount Drawbar (860201117) Compatibility: XU Skandic, XU Expedition Fits on XU Heavy-Duty Rear Bumpers (860200991) or (860201106). Fits on Multi-Mount Drawbar (860201117) Availability date: 3-9 days

Ultra warm handlebar muffs with fleece liner Designed for extreme cold conditions Easy to remove in warmer weather Can be used on handlebars with or without handguards and mirrors Inner skeleton allows muff to keep its shape and gives more space for hand movement Transparent section allows visibility and easy manipulation of control switches Note: Never use handlebar muffs with finger throttle lever Compatibility: Does not fit vehicles with large handlebar pad Fits with all handguards 2015 and up Availability date: 3-9 days

Designed for a perfect fit on REV Gen4 Summit side panels Provide comfort, impact absorbtion and extra knee grip Injected molded soft material Easy install with peel off adhesive REV Gen4 (Narrow) Summit Rewind Cover (860201463) required if pull start Compatibility KNEE PADS - REV GEN4 (NARROW) SUMMIT, BACKCOUNTRY, FREERIDE, XS, XM WITH ELECTRIC START Availability date: 3-9 days

Increases rail strength and longevity Compatibility 146" TO 165" WITH TMOTION AND CMOTION REAR SUSPENSIONS Availability date: 3-9 days

Easy-install bumper changes the appearance of your sled in minutes Compatibility: REV-XM, XS Availability date: 3-9 days

Handlebar extension kit to fit all riding styles Works with all stock wiring and cables Compatibility: REV-XS (except Grand Touring and Expedition), XR, XP, XU Tundra Availability date: 3-9 days

Handlebar extension kit to fit all riding styles Works with all stock wiring and cables Compatibility: REV-XS Renegade Backcountry (2011 and up) with 6.3” (160 mm) riser block Availability date: 3-9 days

Handlebar extension kit to fit all riding styles Works with all stock wiring and cables Compatibility: REV-XM Summit SP, REV-XU Skandic, Tundra - Vehicles with 8” (205 mm) riser block Availability date: 3-9 days

Compatibility Allows installation of LinQ Cargo Base (860201806) on embossed REV-XU tunnels. REV-XU Skandic, XU Expedition Availability date: 3-9 days

Protects your bulkhead and heat exchangers in all conditions Provides proper protection for stud installation on pre-studded track So unique with it’s patent pending US20160152304 Compatibility: REV Gen4 with Ice Ripper track or Woody’s studs Availability date: 3-9 days

Instantly modify your handlebar height to adapt to changing riding conditions Utilize the lower position for trail / sit down riding: extend to maximum height in seconds for stand up riding No tools required to make the adjustment, just flip the lever Patent pending US20150360713A1 Compatibility: Compatibility: SUMMIT ((X and SP) with 165 mm riser (2018 and up), (X and SP) with 190 mm riser (2017)); FREERIDE (137-146" with 145 mm riser), (154-165" with 165 mm riser); EXPEDITION ((Sport) with 145 mm riser); BACKCOUNTRY ((Backcountry, X, X-RS) 146" with 120 mm riser); RENEGADE ((Adrenaline and Enduro) 137" with 120 mm riser), ((X and XRS) 137" with 120 mm riser Forward Adjustable Riser); MXZ ((TNT and Blizzard ) with 120 mm riser), ((X and XRS ) with 120 mm riser Forward Adjustable Riser); GRAND TOURING ((Sport) with 120mm riser), ((LE) with 120 mm riser Forward Adjustable Riser) Availability date: 3-9 days

Protects your bulkhead and heat exchangers in all conditions Provides proper protection for stud installation on pre-studded track So unique with it’s patent pending US20160152304 Compatibility: REV Gen4 with 129’’ Ice Cobra or Ice Attak XT track Availability date: 3-9 days

Protects your bulkhead and heat exchangers in all conditions Provides proper protection for stud installation on pre-studded track So unique with it’s patent pending US20160152304 Compatibility: REV Gen4 with 137’’ Ice Cobra or Ice Attak XT track Availability date: 3-9 days

Protects your bulkhead and heat exchangers in all conditions Provides proper protection for stud installation on pre-studded track So unique with it’s patent pending US20160152304 Compatiility: REV Gen4 with 146’’ Ice Cobra or Ice Attak XT track Availability date: 3-9 days

The Dooly† by Woodys has two 7/16” Flat-top† runners mounted on a plate for each ski Four contact lines on snow surface help decrease darting of sled as it makes own groove in a trail When in a turn, only one of the Dooly bars is in contact with the snow or ice A Dooly with 4”, 6” or 8” of carbide on both runners provides the same turning power as a single runner with 4”, 6” or 8” of turning carbide Sold individually Compatibility: Pilot skis, except DS & DS-2 Availability date: 3-9 days

Windshield extension mount design Sold in pairs Compatibility: REV-XM, XS, XP, XR, XU (with medium and higher windshield side deflectors) Availability date: 3-9 days

Easy-install bumper changes the appearance of your sled in minutes Compatibility: REV-XM, XS Availability date: 3-9 days

Easy-install bumper changes the appearance of your sled in minutes Compatibility: REV-XM, XS Availability date: 3-9 days

Heavy-duty aluminum bumper for hitch applications Easy attachment with no cutting or drilling Doesn’t fit Grand Touring SE, LE Compatibility: REV-XS, XP, XR, XU Tundra Does not fit on Freeride 137” Availability date: 3-9 days

BRP’s Rotax 4-stroke ACE and 1203 engines that operate in northern latitudes will benefit from premium oil formulated for easier starting and ultimate cold flow In temperatures down to -76°F /-60°C, XPS 4-Stroke Extreme Cold Grade Synthetic Oil flows fast from the sump to protect critical engine components at start-up Formulated to maintain viscosity at operating temperature Availability date: 3-9 days

Spring-loaded latch system for quick, secure hook up Compatibility: REV-XU Skandic, XU Expedition Availability date: 3-9 days